Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
9. Hold the slides on big drawer while
aligning them with the slides on side
panels (C and D). Slightly insert one side
and repeat for the other side. Slowly push
the drawer until it is fully closed to engage
the slides. Open and close the drawer to
verify proper operation.
10. Install the bottom shelf (G) by tipping it to
the side and inserting it into the cabinet.
With bottom shelf (G) at an angle, align
the cut-outs on the bottom shelf (G) with
the back seams caused by side panels (C
and D) and back panels (A and B).
Carefully lower the bottom shelf (G),
ensuring the front of the bottom shelf (G)
goes over the front flange of the door
support bracket (L).
Determine the location for the other 2
adjustable shelves (H). Hold the
adjustable shelves (H) at an angle to
make them easier to install. Repeat
above method to install. Please make
sure adjustable shelf (H) snaps into the
hooks on the unit.
Note: If the hooks are flatted during
assembly, use a slotted screwdriver (not
included) to recover them.
9
N
10
C
H
G
L
10
C
C
H
A
D
D
