Idiomas disponibles
Idiomas disponibles
General Power Tool Safety Warnings
facilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
h. Do not let familiarity gained from fre-
quent use of tools allow you to become
complacent and ignore tool safety prin-
ciples. A careless action can cause severe
injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the cor-
rect power tool for your application. The
correct power tool will do the job bet-
ter and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the plug from the power
source and/or remove the BATTERY pack,
if detachable, from the power tool before
making any adjustments, changing ac-
cessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool's operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g. Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations differ-
TG503 Tuck Point Grinder Guard OSI Final 20230606.indd 4
TG503 Tuck Point Grinder Guard OSI Final 20230606.indd 4
ent from those intended could result in a
hazardous situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slip-
pery handles and grasping surfaces do not
allow for safe handling and control of the
tool in unexpected situations.
5. Battery tool use and care (cord-
less only)
a. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of BATTERY pack may
create a risk of fire when used with another
BATTERY pack.
b. Use power tools only with specifically
designated BATTERY packs. Use of any
other BATTERY packs may create a risk of
injury and fire.
c. When BATTERY pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the BATTERY terminals together
may cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the BATTERY; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
BATTERY may cause irritation or burns.
e. Do not use a BATTERY pack or tool that is
damaged or modified. Damaged or modi-
fied batteries may exhibit unpredictable
behavior resulting in fire, EXPLOSION or
risk of injury.
f. Do not expose a BATTERY pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 265 °F / 130 °C
may cause explosion.
g. Follow all charging instructions and do
not charge the BATTERY pack or tool
outside the temperature range specified
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the BATTERY and increase the
risk of fire.
SAVE THESE INSTRUCTIONS
-4-
6/6/2023 1:42:56 PM
6/6/2023 1:42:56 PM
