iOttie iTap 2 Wireless Manual página 4

Qi Alignment Guide
The Qi receiver coil is usually located in the center area of the phone.
Check with your phone's manufacturer for Qi coil location. Below are
some examples for commonly used phones.
Qi Coil
Magnets Metal Plate
We strongly suggest you use the included placement guide to place the metal
plate at the bottom of your smartphone or case for receiving an optimal charge.
6 EN
A. Align the + symbol and the side
market lines with the center of your
phone or case, making sure the
cut-out for the metal plate is at the
bottom.
B. Once aligned, remove adhesive strip
at the top and stick the placement
guide to phone.
1B
1A
Place one of the metal plates as
3
indicated by the cut-out on the guide.
Save the other metal plate as backup.
A. Lift the guide from the bottom to
2
stick the protective film onto the
area where the metal plate will be.
B. Put placement guide back down,
flat against your phone or case.
*The protective film is not necessary if
you're using a phone case.
Remove the placement guide. Then
simply position the metal plate on
top of the magnetic mount head.
7