Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
TM
Weight Limit: 500 Lb / 227 Kg
K.T. - 2017/12/1
© 2014 Dorel Home Products All Rights Reserved
Thank you for purchasing from DHP!
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/support-home
or call Toll-Free 1-800-267-1739
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
4172639N
Upholstered Bed
Queen
Blue linen
Lot Number
B344172639N00 - 10125-M
1
Manuales relacionados para DHP 4172639N
Resumen de contenidos para DHP 4172639N
- Página 1 Upholstered Bed Queen Blue linen Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
- Página 2 Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
- Página 4 Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Before you throw the package, please use the Side Panel Side Panel T955900 T955910 T955920 T955930 Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
- Página 5 Hardware Pack Hardware Pack #: T4135439N-01 1/4" X 3/4" X 40 1/4" X 1 3/16" X 12 1/4" X 1 9/16" X 18 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
- Página 6 Step 1 Attach Z X 4 to A and B with Screw into A and B as illustrated. Leg tip slants towards outside. Do not completely tighten the BOLTS , leave half of the thread exposed. To avoid fraying the fabric during assembly, please lay A and B on a piece of cardboard.
- Página 7 Step 2 Attach E&F to C&D with Repeat the same step for remaining parts C/D/E/F. Slat holes towards upside! The holes shown in circle are located on the lower side. X 16...
- Página 8 Step 3 Attach S to D and T to C with Repeat the same step for the other subassembly C & D. Pay special attention that small holes on slots of S and T should be facing upward! X 12...
- Página 9 Step 4 Hang C & D on A & B as illustrated, don't completely tighten the bolts until STEP 7 is complete.
- Página 10 Step 5 Attach L X 2 to K with...
- Página 11 Step 6 Attach sub-assembly K/L to C and D with...
- Página 12 Step 7 7.1 Attach I x 2 to A and B with 7.2 Attach I x 2 to K with , then properly tighten all the bolts.
- Página 13 Step 8 8.1 Insert O1 into X ; 8.2 Press X into E&F , repeat the same procedure for the opposite side. 8.3 Insert both ends of slats O1 into Y , then press Y into I as illustrated. Repeat the same procedures going backwards for every row of slats.
- Página 14 ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
- Página 15 Garantía Gracias por su compra DHP! DHP garantiza que este producto está libre de defectos de material y de fabricación, comprometiéndose a corregirlos en caso de ser hallados. Esta garantía es valida por Registra tu producto y participa para ganar! un año a partir de la fecha de compra original.
- Página 16 Partes Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. Piezas de reemplazo, visite www.dhpfurniture.com/spa/support-home ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto.
- Página 17 A&B. llevando el aparato a su nueva ubicación. Paso 2 ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de Una E&F con C&D con los . Repita el paso para las otras partesC/D/E/F. mudanza.
- Página 18 Garantie Merci d'avoir acheté un produit de DHP ! DHP garantit que ce produit est exempt de tout vice de matériaux et de fabrication et Enregistrez votre produit et s'engage à remédier à un tel défaut. Cette garantie couvre un an à compter de la date d'achat originale.
- Página 19 Avant de commencer l'assemblage Pièces ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. Pièces de rechange, visitez www.dhpfurniture/fre/support-home ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le Tout dans 1 grosse boîte! plancher et le produit.
- Página 20 à A&B. personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Étape 2 ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les Attacher E&F à C,D avec . Répétez la même étape pour les autres C/D/E/F.