Idiomas disponibles
Idiomas disponibles
4. Powering the Powered Device
JetNet 4706/JetNet 3706 series follows the IEEE 802.3af Alternative
B mode connector assignment.
The power is provided through pin of 4, 5, 7 and 8 of the RJ-45 port.
Please ensure that your powered device (PD) is fully compatible with
IEEE802.3af and able to receive power described above, or the PD
will not work properly with the JetNet PoE Switch.
Caution: Ensure JetNet 4706 / JetNet 3706 mounted on well
o
heat radiated panel and under 60
C environment during PoE
port progress High Power forwarding . High Power PoE
feeding will cause system temperature to increase.
5. Connecting the Fiber ( JetNet 4706f / JetNet 3706f only)
JetNet 4706f / JetNet 3706f includes 2 fiber ports for Fast Ethernet Fiber uplink or for
connection to other Fibre-Optic devices. Two fiber ports of a switch are homogeneous;
either both multi-mode (up to 2km) or single-mode (up to 30 km).
ATTENTION
This is a Class 1 Laser/LED product.
Don't stare into the Laser/LED Beam.
6. Device Grounding
There is one grounding screw on the right side of the JetNet 4706 / JetNet 3706 series.
Connect the frame grounding of switch to the grounding surface, to ensure safety and
prevent electric noise.
Device Management
The JetNet 4706 series Industrial Managed PoE Switch provides both in-band and out-band
!
configuration methods and JetNet 3706 series provides in-band configuration method via
Web browser only.
Caution
You can configure the switch via the RS232 console port with the attached console cable.
High temperature
Or you can remotely manage the switch via network, using Telnet / SSH or Web / HTTPS
DO NOT TOUCH DEVICE
management.
SURFACE DURING PoE
PROGRESS HIGH POWER
Web management: Make sure your JetNet 4706 / JetNet 3706 is properly connected to your
FEEDING
local network, in the same subnet.
1.Launch the web browser (Internet Explorer or Mozila Fire fox) on the PC.
2.Type http:// 192.168.10.1 /, then press Enter. The default IP address of JetNet 4706 /
JetNet 3706 series is 192.168.10.1
3.The login screen will appear and then key in the user name and the password.
The default user name and password is admin/admin.
4.Click OK, and you will enter web console.
5.The left column of web console shows the software functions; the right column lists
available settings.
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional staffs are
ready to answer your questions at any time.
The e-mail address of the Korenix Global Service Center is [email protected]
