Bosch FNS138-23 Instrucciones De Funcionamiento Y Seguridad página 12

BM FNS138-23 11-11_BM BNS200-18 04-09 1/9/13 9:11 AM Page 12
Maintenance performed by unauthorized
WARNING
personnel may result in misplacing of the
internal components which could cause serious hazard.
We recommend that all tool service be performed by a
BOSCH factory service center or authorized BOSCH
service station.
Contact your BOSCH service center for instructions and the
following user replaceable parts: o-rings, bumpers, and
driver blades.
For all other repairs contact your BOSCH service center.
When cleaning a tool be careful not to
WARNING
disassemble any portion of the tool since
internal components may be misplaced or safety
components may be improperly mounted. Certain
cleaning agents such as gasoline, carbon tetrachloride,
ammonia, etc. may damage plastic parts and o-rings.
Do not attempt to clean by inserting
WARNING
pointed objects through openings. Sharp
edges may damage internal components causing a serious
hazard.
Ventilation openings and the trigger must be kept clean and
free of foreign matter. Periodically clean the tool with
compressed air.
Clean the magazine. Remove metal or wooden chips which
may have accumulated in the magazine. Periodically clean
magazine with compressed air.
When not in use, the tool should be disconnected and
stored in the storage case in a warm and dry place. When
tool will not be in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
Do not store the tool in a cold weather environment.
Keep out of reach of children and
WARNING
personnel unfamiliar with tool operation.
Lock the storage area. Tools are dangerous in the hands of
personnel unfamiliar with the tool.
Maintenance
Service
Cleaning
Storage
ACTION WHY
Drain air line filter Prevent
daily accumulation of
moisture
and dirt
Keep lubricator Keep the Nailer
filled lubricated
Clean filter element Prevent clogging
- then blow air of filter with dirt
through filter in
direction opposite
to normal flow
Clean magazine Prevent a jam
and feeder
Keep trigger Promote operator
working properly safety and efficient
tool operation
Lubricate the tool Extend tool life
Drain air Keep water out
compressor of tool
12
HOW
Open manual
valve
Fill with BOSCH
pneumatic tool
lubricant
Follow
manufacturer's
instructions
Blow mechanism
clean daily
Blow clean daily
Place 2-3 drops of
lubricant
into the tool as
directed
Open valve on air
compressor tank