Idiomas disponibles
Idiomas disponibles
A4
1
A5
EN
1. Toggle needs to be inserted into the "T" hole, then
o
twisted 90
.(See Fig A2 & A4).
2. Fix the strap with screws & washers.(See Fig A3).
Screws &washers are in the parts pack.
3. Keep the toggle in a flat status and push it through
the hole as shown.(See Fig A5).
Note: The harness is designed with two "T" holes
in the upper frame to provide two height for your
choice. It is suggested to choose upper "T" hole if
you are rather tall.
Attach waist belt to the harness frame.( See Fig A6)
A6
10
1
2
2
1
2
2
1
1
2
Fix the waist belt to the frame with screes & washers
as shown.(The screws and washers are provided in
the parts pack )
Fix the shoulder toggle into the harness frame.(See
A7)
A7
Insert the shoulder toggle into the harness frame as
shown.
Assemble the blower tube
Assemble the flexible tube to the the blower outlet
(See Fig. B1)
B1
2
1
1. Attach the flexible tube to the blower outlet(
then put the clamp on the flexible tube(
2. Fix the clamp with screws as shown(
Note:Screw tightening torque value should be set
between 10.6 in∙lb(1.2Nm) and 14.2 in∙lb(1.6Nm).
Assemble the blower tube, coupler and flexible tube.
(See Fig. B2,B3)
1
2
1
2
3
1
),
1 2
);
1 3
).
