Engel DVB-T Full HD Manual De Usuario página 62

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Software Guidelines
1. From the "ComPort" combo box choose the correct USB port on your PC that con-
nects the MV7470 and press "Connect". To find out, go to the Control Panel of your
PC (System / hardware / Device Manager / Ports / USB Serial Port)
2. Once the software has successfully connected with the device, it will automati-
cally download all the settings of the MV7470.
3. The DVProbe consists of four sub-categories as described below:
· DVB-T Settings – Parameters regarding the modulator part
· Encoder Settings – Parameters regarding the H.264 encoder
· Multiplexer Settings – Parameters regarding the multiplex part
· System Settings – Parameters regarding system information
1. DVB-T Settings
In this category the user is able to adjust several parameters of the modulator RF
output part, as described below:
1.1 Channel - Output channel selection (VHF:5-12 & UHF:21-69)
1.2 Bandwidth - Bandwidth selection
1.3 Constellation - Constellation selection
1.4 Modulation - Modulation selection
1.5 Guard Interval - Guard Interval selection
1.6 Code rate - Code rate selection
2. Encoder Settings
In this category the user is able to adjust parameters of the H.264 encoder, as des-
cribed below:
2.1 Input source – Select the primary input source
2.2 Video BR (Mpbs) – Set the video bitrate
2.3 Audio BR (Kbps) – Set the audio bitrate
2.4 Audio Encoding – Select the audio encoding
2.5 HDCP ON/OFF – Enables/disables HDCP
3. Multiplexer Settings
In this category the user is able to adjust parameters of the MV7470 multiplexer, as
described below:
62
Tabla de contenido
loading

Productos relacionados para Engel DVB-T Full HD

Este manual también es adecuado para:

Mv7470

Tabla de contenido