Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PROBLEM
The device will not
heat up.
No steam is being
emitted from the
device.
Excess
water
dripping from the
ceramic soleplate.
Hose
makes
buzzing noise.
POSSIBLE CAUSE
The device is not
connected
mains power supply.
The temperature is
set too low.
The fuse has blown.
There is insufficient
water in the water
tank.
The pump is still
drawing water from
the water tank.
is
This is condensation
inside the ceramic
soleplate.
a
The hose is tangled.
POSSIBLE SOLUTION
Plug in and switch on
to
the
the device at the
mains power supply.
Increase
temperature
the
control dial, ensuring
that the fabric's care
instructions
followed.
Replace the fuse with
one of the same
rating.
Fill the water tank
following
instructions
section
'Filling
Tank*.
Press and hold the
steam button a while
longer to allow the
water to pump into
the iron; this should
takes approximately 1
minute.
Allow the device to
heat
selected temperature
before using any unit.
Untangle the hose.
the
using
temperature
are
the
in
the
entitled
the
Water
up
to
the
Tabla de contenido
