Idiomas disponibles
Idiomas disponibles
Box content :
1 Cosmo Ride
1 Remote control
1 oblong clip with 3M adhesive for fixing on the helmet
2 short and 1 long flexible clamps for easy and tool-free attachment of the
remote control to the handlebars and the Cosmo Ride to the seatpost
Micro USB charging cable
User guide and warranty
70% isopropyl alcohol wipe to clean your helmet before attaching the
adhesive base
a. How to install your Cosmo Ride
• Install the Cosmo Ride
To mount the Cosmo Ride and the remote control, please refer to the
provided quickstart instructions and only use the provided accesso-
ries.
Make sure to remove your Cosmo Ride carefully: do not pull it out from
its base and do not force on the fixation to remove it.
b. Using the Cosmo Ride and the Remote control
Before first use, connect your Cosmo Ride with the included micro-
USB cable to a powered port. The micro-USB connector is located on
the back of the product, on the right side behind the protective tab.
The Cosmo Ride will light up. Disconnect it. You will now be able to use it
as position light, with active automatic brake light.
To be able to use the remote control, to activate turn signals, to
configure the light modes and to enjoy the safety connected services, you
will then need to pair it with the Cosmo Connected application: . Download
the Cosmo Connected app via the Apple Store or Google PlayStore.
. Activate Bluetooth ® wireless technology and Geolocation feature on
your phone, make sure you have internet access.
. Launch the application and follow the instructions to pair each
device. Once set up, you will be able to choose your light mode using the
remote control or the app.
Important : If you encounter any difficulties during the installation of the
application: we advise you to check that your Cosmo Ride or your remote
control are not directly paired via the Bluetooth settings of
