Idiomas disponibles
Idiomas disponibles
S A G I T TA X
Installation
Step A: Removing your existing power supply If you are building a new system, skip to Step B.
1.
Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply.
2. Disconnect all the power cables from your video card, motherboard and all other peripherals (SATA & MOLEX)
3. Follow the directions in your chassis manual and uninstall your existing power supply.
4. Proceed to Step B.
Step B: Installing the SAGITTA X power supply
1.
Make sure the power supply's AC power cable is not connected.
2. Follow the directions in your chassis manual and install the power supply with the screws provided.
3. The main 24-pin power cable has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket
on the motherboard.
A. If your motherboard has a 24-pin socket, you may connect the 24-pin main power cable from the power supply
directly to your motherboard.
B. If your motherboard has a 20-pin socket, you must detach the four-pin cable from the 24-pin connector, and then
plug the 20-pin cable onto your motherboard without connecting the four-pin connector.
4. Connect the eight-pin +12V (EPS12V) cable to the motherboard.
A. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard.
B. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin
cable directly to your motherboard.
5. Connect the eight-pin (PCIE 6+2) cable to the Graphics card.
A. If your graphics cards have more than 1 connector, attach as many as you need.
SATA connector
Reference
24-pin main power
cable
Eight-pin (PCIE 6+2)
cable
EN
750W / 850W / 1000W 80+ GOLD
MODULAR ATX 3.0 PCIE5.0
POWER SUPPLY MANUAL
or
eight-pin +12V
(EPS12V) cable
8
