Resumen de contenidos para Bolanmu Energy VT MPPT Serie
Página 1
Bolanmu Energy Quick guide VT series MPPT...
Página 2
Introduction Congratulations ! You are about to install and use a high-end equipment that will play a central role in the energy management of your battery-based system. The (vt) is a solar MPPT charge controller. When connected to a battery and photovoltaic panels the vt will recharge the battery in an optimum way.
Página 3
General Information Compatible with : Exclusion of liability Bolanmu disclaims all responsibility and liability for damage, costs or losses resulting from an installation that does not comply with the instructions, a faulty operation or inadequate maintenance. The use of Bolanmu equipment is in any case under the responsibility of the customer.
Página 4
Mounting and installation Storage and content Fixing and dimensions 60°C 84mm -20°C vt 80 min. 200mm min. 50mm Mounting place min. 200mm 3.8 – 5.5kg vt 80 cooling fan 205mm 120mm...
Página 6
Multi units and power up Display Display system on – the device is off blink – error, check the manual MPPT solar charger 35 / 40A Error 25 / 30A 15 / 20A Float. 1x Charge Absor. 2x Equal. 3x 5 / 10A Night No PV voltage...
Página 7
Configuring the VT vt 80 specificities Battery voltage (check manual) Lead-acid • Configure charge auto profile according to manufacturer Lithium (comm BMS, xcom CAN) off • Check compatibility list and xcom CAN manual Spare Others : NiCd, Activate DIP switches configuration •...
Página 8
Technical data Maintenance and recycling Maintenance and recycling Except for the periodic check of the connections (tightening, general IP 54 condition), the VT does not require any particular maintenance. To dispose of this product, please use the service for the collection Protection Class I of electrical waste and observe all obligations in force in the place of purchase.