Idiomas disponibles
Idiomas disponibles
Grounded Outdoor Countdown Outlet Timer
Safety Information
NOTE: This product is suitable for use with outdoor appliances. This is a grounded device.
It has a grounded plug and three grounded outlets.
Store indoors when not in use.
WARNING
: RISK OF ELECTRIC SHOCK:
Do not use with an extension cord.
Plug directly into a GFCI electrical outlet.
Fully insert the plug.
Unplug timer before cleaning, use dry brush or duster to clean.
Keep away from children.
: RISK OF FIRE:
WARNING
Do not use to control appliances that contain heating elements such as cooking
appliances, heaters, irons, etc.
Do not exceed electrical ratings.
: Suitable for outdoor location. Not for water immersion or for use where directly
WARNING
exposed to water. When used for controlling pool pump, receptacle must not be less than
10 ft. from the inside walls of a pool.
CAUTION:
When using in outdoors, plug only into a GFCI protected receptacle. Ensure
the receptacle is mounted in an approved "weatherproof" type outside box.
Ratings
125 VAC, 60 Hz
15A General purpose
1875W General purpose
1000W Tungsten
1/3 HP
Installation
1. Mounting the timer
Mount the timer onto a wall near a GFCI receptacle
with the timer's light sensor (B) facing outward.
Install a nail or screw head (not included) into a wall.
The nail or screw must extend at least 7/8 in. out
from the wall and allow the timer to be 3 ft. (0.9 m)
above ground level.
NOTE: To ensure proper operation of the automatic function, ensure the light sensor is
shielded from all night time sources of light, such as floodlights.
2. Installing the timer
Hang the timer from the eyelet on the top right of the
unit with the receptacle (D) facing downward so that
moisture does not accumulate in the outlet.
Plug the grounded power cord (A) into a GFCI
outlet.
Plug the device you wish to be on a timer into the
receptacle (D).
A
4
B
D
