Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Funnel cover
• Funnel
• Motor bracket
• Telescoping legs (3)
• Additional cutting lines (20)
• Manual with registration card
1. Carefully remove the electric leaf mulcher + shredder and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the leaf mulcher +
shredder. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
Mulcher Stand Assembly
1. Loosen the height adjustment knob on the telescoping leg
by turning it counter-clockwise (Fig. 1).
Fig. 1
Height adjustment knob
2. Pull the tube to the desired height. Tighten the knob
clockwise to secure the leg in place (Fig. 2).
customer service center at
®
Telescoping leg
Fig. 2
Telescoping leg
3. With your finger pressed against the leg pin, insert the leg
into the hole on the motor bracket. Let the pin slip into the
hole to secure the leg in place. Repeat steps 1 through
3 with the other two legs until all three legs are properly
fitted (Fig. 3).
Fig. 3
4. Stand up the unit, and ensure it stands securely on all
three legs (Fig. 4).
Fig. 4
6
Leg pin
Assembly
hole
Leg pin
