Mp3/Wma Compatibility; Reset Switch - Teac SL-D920 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MP3/WMA compatibility

This unit can play MP3/WMA files recorded on a CD-R,
CD-RW disc, or USB memory. Refer the instruction manual
of software when making an MP3 or a WMA file using a PC.
< This unit can play back monaural and stereo MP3/WMA
files that are in the MPEG-1 Audio Layer 3 format with
a sampling rate of 44.1 or 48 kHz and a bit rate of 320
kbps or less.
< The WMA file must be sampling rate 44.1 kHz, bit-rate
192 kbps or less.
< This unit is not compatible with discs that have been
recorded using multiple sessions. Only the first session
can be played back.
< This unit cannot play copyright protected files.
File information display
The display of this unit can only show single-byte letters
and numbers.
< If a file information uses Japanese, Chinese or other
double-byte characters, playback is possible but the
name will not be shown correctly.
Cautions when preparing MP3/WMA files using a
computer or other device
< Always include the extension in the file name. This unit
recognizes MP3 files by their ".mp3", WMA files by their
".wma" file extensions.
< Always close the session (complete disc creation).
This unit cannot play discs if the session has not been
closed.
< Carefully read the manual for the software that you are
using when you create an MP3/WMA disc.
Discs/USB memories that are unplayable or only
partially playable
< Files without extensions cannot be played. Files that are
not in the MP3/WMA format cannot be played even if
they have extensions.
< Variable bit rate files might not play back correctly.
< If the disc has more than 999 files or 99 folders, this unit
can not play back correctly.
< Depending on disc conditions, this unit might not be
able to play a disc or skipping might occur.

RESET Switch

In the following cases, function buttons might not
work properly.
< If the system is damaged by some electrical shock.
< If the power supply is irregular or has electrical noise.
In these cases, press the RESET switch once or twice
lightly with a pencil or a ballpoint pen.
7
Tabla de contenido
loading

Tabla de contenido