Fonexion ideus ITDECTBB10 Manual De Usuario página 26

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ITDECTBB10
USER GUIDE
Auto answer
The handset can be configured to accept calls while placed on the charging pod. Select
the status ON/OFF inside this menu and press OK to apply changes.
Call barring
You can block the outgoing calls by setting up to 4 numbers of your choice. By default,
this list of locked numbers is empty and therefore the option status is turned OFF.
Set the status value as "ON" and enter the numbers you want to block.
Date and Time
Go to Menu/ Date&HRS and use the direction keys to set up the correct date and time on
your handset. Press OK to validate the changes.
LCD Contrast
You can chose the most satisfactory contrast level for you between 8 levels of intensity.
Select Base
The handset will allow you to save up to 4 base registries. It's recommended to leave
this value as "auto", so the handset will register by itself on the most suitable base unit.
Restore to factory settings
Select this choice on the menu HS ININT to restore the handset to its previously configured
default values. You'll be asked to enter the PIN code (0000 by default) to complete the
process.
8
REGISTRATION
Use the direction keys to access to "REGISTER". A maximum number of 5 handsets can
be linked to the same base unit, and 4 bases can be linked to the same handset.
Make the registering following the below steps:
1- Go to Registration and select the base where you want the handset to be registered.
2- Accept the selected base by pressing "OK".
3- Enter the PIN code and press "OK".
4- Wait for the message "SEARCH 1" to appear on the screen.
5- Go to the base where you registered the handset in and press and hold the
key,
until you hear a confirmation tone. That will mean that the registration process has been
completed.
Notes:
- If the phone is unable to register to any base it will return to idle mode.
- The
key on the base of the charging pod can be used to locate a handset. When
pressing the button once, the handset (or handsets) registered to the base will emit a tone
in order to help you find it.
26
EN
Tabla de contenido
loading

Tabla de contenido