Pur Line HEATY HA 1200 Manual De Usuario página 10

OPERATION
Note: Install the chassis before use.
Method: remove the fixing screws (tightened when delivered from the factory) from the base plate and pass
the power cable through the centre hole, and fix the chassis to the body of the appliance with the fixing screws
removed.
USE
- Plug the appliance into a mains socket.
- The heater has several heating powers. Select the desired heating power: low - medium - high.
- Press the oscillation button, the heater will start the oscillation function within the range of 90 degrees (only
for heaters with oscillating function).
- The heating direction can be changed by slightly lifting the handle to rotate the frame, and the heater will
change the direction within the range of 60 degrees.
SAFETY FEATURES
- The heater has an anti-tilt safety system.
- A thermal overload protector is built in to prevent overheating.
- When an overheating temperature is reached, the heater will automatically shut off. It can only resume
operation after the user resets the unit.
Reset :
- Unplug the heater and wait for the appliance to cool down.
- Switch the appliance back on and operate normally.
NOTE: It is normal that when the heaters are turned on for the first time or when they are switched on after not
having been used for a long period of time the heaters may emit some odour and fumes. This will disappear
when the heater has been on for a short time.
8