Manta MM438 Manual De Usuario página 4

GENERAL SAFETY
• Do not cover, restrict air inlet/out or use to dry
clothes.
• Carefully use when children, old man, disabled
man inside solely. No use when no supervision
• Only use in the upright position on a flat level
surface.
• The surface of this fan heater is not closely
supervise any children and pets in using.
• Do not use fan heater near flammable or heat
sensitive items.
• Do not position in point of or under power
sockets, shelving or other obstructions to airflow.
ELECTRICAL SAFETY
• For indoor use only.
• Switch off and unplug when not in use
• Do not full the heater along the cord or use if
damaged
• Do not use heater in humid or wet environments
• If the supply cord is damaged. It must be
replaced by an electrician or similarly qualified
person to avoid hazard.
TO USE
Turn the heater to the "off" position before plug-
ging in. The operating temperature is selected by a
combination of the heater switch and thermostat.
The hottest setting will be when the heater switch
is in II position and the thermostat is turned to "ma-
ximum".
To determine the correct working temperature for
your conditions, turn the heater to "II" and the ther-
mostat to "maximum" when the room has reached
the required temperature turn the thermostat
slowly to the left until the tem perature is off.
The temperature will now be kept con stant. If you
want to lower the operating temperature select "I"
position of the heater and repeat the above proce-
dure. The heater is fitted with an automatic cutout
in the event that it overheats. If is this activates,
turn the heater to the off position and unplug.
Allow the heater to cool and remove anything re-
stricting the airflow before using the heater again.
If the automatic cut out operates repeatedly con-
tact a quantified serwice for advice.
NOTES! For maximum benefit, closing windows
and door when the heater is open.
Do not cover the ventilation holes as this will
cause overheating and will activate the cut out.
EN
USING THE FUN
I summer hot days please turn the knob to setting
with fun sign.
1. HANDLE
2. TERMOSTAT
3. CONTROL LIGHT
4. SWITCH
CLEANING AND MAINTENANCE
To maximum the efficiency of the heater cleans
regularly. Switch power switches to "off" position,
unplug and allow the heater to cool. Wipe surfaces
with a soft cloth. Do not use detergent or abrasives
as this with scratch the surface. Ensure the intake
grills free front dust, as this will re duce the airflow.
Light accumulated dust can be removed with soft
cloth or vacuum cleaner. Allow surface to fully dry
before using the heater again.
MAXIMUM THE LIFE OF YOUR HEATER
Avoid knocking or scratching the heater.
Do not in dusty environment.
When not in use cover heater and store in clean,
cool and dry area.
3