Idiomas disponibles
Idiomas disponibles
INSTALLING THE FAN TO MOUNTING BRACKET ON CEILING
EN
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box
before wiring.
1.
Install ball end of downrod into mounting bracket opening. Align (engage) slot on ball with
tab on mounting bracket. Warning: Failure to align slot on ball with tab may result in serious
injury.
2.
Slide the canopy up to ceiling andalign the keyhole slots on the canopy with the preassembled
screws on the hanger bracket. Twist clockwise until it locks. Tighten the two screws securely.
MAKE THE ELECTRIC CONNECTIONS
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box
before wiring.
1.
Insert the receiver into the mounting bracket with the fl at side of the receiver facing the
ceiling.
2.
Motor to Receiver Electrical Connections: Connect the brown wire from the fan to output
brown wire from the receiver. Connect the white wire from the fan to the output white
wire from the receiver. Connect the Blue wire from the fan to the output blue wire from the
receiver. Secure wire connections with the wire nuts provided.
3.
Grounding wire connection: Connect the grounding wire from the ceiling to green/yellow
wire from mounting bracket and downrod. Secure wire connection with wire nuts provided.
4.
Receiver to House supply wires Electrical Connections: Connect the brown (live) wire from
the ceiling to the brown wire from the receiver. Connect the blue(neutral) wire from the
ceiling to the blue wire from the Receiver. Secure the wire connections with the wire nuts
provided.
16
Base plate
Screw (x3)
Light kit
Light kit
Glass shade
