PNI PSF6020 Manual De Usuario página 3

Camera installation and connection details
Note: The PNI PSF6020 photovoltaic solar panel is compatible with any camera with 12V
power supply.
1. Connect the power adapter from the battery to the camera.
2. Connect the solar panel to the battery.
3. Turn on the battery power using the red round switch:
Note: Before use, we recommend fully charging the battery for approximately 8 hours.
Connect the power supply (not included) to the black connector with the rubber cap.
4. Information about the battery is provided by the 3 LEDs located on the installation
support.
Left LED
Charging
On: solar charging
Off: not charging (lack of
sun)
3
Central LED
Battery
Flashing Red: Battery ≤ 25%
Flashing Red and Green: Battery ≤ 50%
Flashing Green: Battery ≤ 75%
Green On: Battery ≤ 100%
Right LED
Output status
On: active output
Off: no output
User manual