Installing The Receiver Module - Phonic UM30 Manual Del Usuario

Installing the Receiver Module

For UM 31��41��51
Active Performer Spea��ers
Remove the compartment cover on the left
side of Performer speaker (left when facing
the rear). Remove the grounding PCB from
the golden finger socket. Insert the UM-R11 re-
ceiver into the module compartment, and use a
screw to secure it into place. Replace the com-
partment cover.
RoadGear 120, 160 and 260
Opening the storage compartment on the rear
of the RoadGear's mixer, users will notice 2
module slots available. Insert the UM-R11 re-
ceiver module into one of these, use a screw to
secure it into place and close the compartment
again.
UM 30/31/40/41/50/51
Powerpod 865 and 885 Plus
Open the wireless module compartment by
removing the single screw. Slide the UM-R11
module along the wall of the compartment door
and into the port connected to the door. Close
the compartment door and replace the screw.
For UM 30��40��50
Sound Ambassador 75��120 Deluxe
Remove the 2 screws at the top of the protec-
tive cover, and remove the grounding PCB
from the compartment. Place the UM-R10 re-
ceiver into the slot revealed after removing the
cover, and screw the front panel of the receiver
in place.
11