Chicco Red Bullet Manual De Instrucciones página 5

FRONT FORK ASSEMBLY
1 Remove protective cap and slide the fork stem through
the front head tube.
2 Push the plastic ring and clamp onto the top of the fork
stem.
1
2
FITTING THE SADDLE
1 Push the saddle pillar into the down tube at least as far as
the Minimum insertion mark.
2 Align the saddle with the bike frame and tighten the
clamp with a spanner.
4
8
7
3
Minimum
insertion
mark
9
10
5
FITTING THE HANDLEBARS
1 Remove protective cap and slide the clamp cover onto the
handlebar stem.
2 Push the handlebar stem into the fork stem at least as far
as the Minimum insertion mark.
3 Align the handlebar with the front wheel and tighten the
clamp with the spanner.
4 Slide the clamp cover down over the clamp.
(Minimum insertion mark)
11
9
3
ASSEMBLED BIKE
Please check all screws and fittings are secure before giving
to your child. The toy should be used with caution, since it
requires great skill, so as to avoid falls or collisions causing
injury to the user and third parties.
5
6
Minimum
insertion
mark
7
8