11
NOTE: The shifter
plate can be installed
on either the Left or
the Right side.
A
A) Remove the bolt and nut preinstalled in the Shifter Socket. B) Align the Shifter and Handbrake Plate assembly
with the Shifter Socket of your choice. Bolt and secure using the hardware pre-installed in the Shifter Sockets.
12
Do not overtighten.
2
1
3
Install the Wheel Plate strengthening strap following the indications on the pictures above. Do not overtighten to
avoid damage to the cockpit.
B
12
13
Repeat
on Other
Connect the Strengthening Straps to the Wheel Plate Tube. Adjust these straps while seated in the cockpit with
your feet resting on the pedals to prevent the frame from lifting off the ground when adjusting.
14
WHEEL PLATE - ANGLE ADJUSTMENT
Loosen the knob under the Wheel Plate, adjust to the desired angle and tighten to lock the Wheel Plate in place.
Video Instruction: bit.ly/nlrbuild
A
B
Side
C
D
13
