Adjusting The Nozzle; Adjusting For Flow (Fan) Pattern; Adjusting For Pressure - AllTrade TRADES PRO 830271 Manual De Instrucciones

Lavadora eléctrica a presión de 1800 lb/pulg

Tabla de contenido

Idiomas disponibles

Gun Trigger to stop spraying before adjusting the Nozzle.

WIDE

STREAM

The angle of spray coming out of the nozzle may be adjusted by rotating the front of the

nozzle (cone). This will vary the spray pattern from approximately a 0° narrow high impact

stream (by turning the nozzle fully to the left) to a 60° wide fan spray (by turning the nozzle

fully to the right).

A narrow stream has high impact force on the cleaning surface and results in maximum deep

cleaning in a concentrated area. However, this narrow high impact spray must be used cau-

tiously, as it may damage some surfaces.

A wide fan pattern will distribute the impact of the water over a larger area, result-

ing in excellent cleaning action with a reduced risk of surface damage. Large

surface areas can be cleaned more quickly using a wide fan pattern.

The Adjustable Pressure Nozzle allows you to vary the pressure of your spray by turning the

end of the nozzle (collar). Turning the collar fully to the right will reduce the pressure to its

minimum. If the Pressure Washer has a detergent injection system you must use this minimum

pressure setting in order to suction detergent.

Turning the collar fully to the left will increase the pressure to its maximum for greatest cleaning

efficiency. Turning the collar changes the pressure but not the fan pattern.

(turned) to low pressure position.