V-TAC VT-5144 Manual Del Usuario página 9

Step7 (LEARNING MODE):
Press and hold Bu�on(as shown) on the App un�l you hear a beep sound from the RFBridge,
the red led of RF Bridge will start to blink rapdily, which means it has entered into learning
mode. Then quickly press the any bu�on of RF Remote. You will hear beep sound twice, and
the red led of RF Bridge will blink twice. This means it has learned successfully. The Bu�on will
lighten. If you use other RF Remote to learn with Bu�on, it will overwrite previous codes.
Please repeat above steps to learn otherbu�ons. If it doesn't learn successfully in 1 minute, it
will �meout and exit learning mode.
Note: Please keep the distance between RF Bridge and RF Remote within 30 meters. If you
want to cancel the pairing bu�ons, please directly delete the RF Remote you have added. One
RF Bridge supports to add up to maximum of 4 RF Remote
Step8 (Controlling RF Device):
Click the bu�ons that has been learned(paired) successfully to turn on/off related RF Devices.
For example, if you have paired an RF Remote (bu�on A) with on/off RF Switch, by adding the
RF Remote to RF Bridge via App. A�er learning bu�on "A" of RF Remote with Bu�on(paired) on
the App. You can directly click the Bu�on on theApp to turn the device on/off from anywhere
at any �me. Once you click the bu�on, the red led will flash once, it means it has successfully
sent the signal.Note 1: You will not be able to see the device status change on the APP. Note 2:
There's no pairing/learning order. So you can pair the RF Devices with RFRemote first, then pair
the RF Remote bu�ons with RF Bridge on App or vice versa.
8
ENGLISH