Carpoint 0280006 Manual De Instrucciones página 4

CARPOINT EV CHARGE CABLE
WARNING
- Do not use if product is damaged, worn out or exposing conductor.
- Follow this manual to use this product.
- This cable is only for EVs with Type 2 inlets. Do not use it for EVs with other types of inlet.
- Do not disconnect from the charging box when charging is in processing.
- This product is only for EV charging purpose. Do not use it for other purpose, including hauling, binding, etc.
- Do not use excessive force on plugs or cable.
- Don't immerse it in the water.
- Do not open up any part of the product by yourself.
- In case any defective issue, do not take it apart and contact your dealer.
SPECIFICATIONS
- EV charge cable type 2 to 2
- 16/32A *
- 1/3 Phase *
- Length 6/10 meter *
- Straight/spiral cable *
- 230VAC ± 10%
- Fits on all EV cars with type 2 connector
- Plug charger side: type 2 male (IEC 62196-2) with protective cover
- Plug EV side: type 2 female (IEC 62196-2) with protective cover
- IP55 protection factor
- Insulation resistance >1000MOhm
- Voltage resistance 2000V
- Contact resistance <0.5mOhm
- Pins temperature rise <50K - Service life >50.000 times
- Vibration resistance meets JDQ53.3 requirements
- Operating Temperature -40°C ~ 50°C
HOW TO USE
1. Plug into charging port of EV charger.
2. Plug into the charging inlet of EV.
3. After charging disconnect from charger and EV and store cable.
Straight cable
STORAGE
Proper use and storage extends the service life of the product and will stabilize its working performance.
- Put the dust cover on after use.
- Preferable keep in protective storage bag/box.
- Keep away from fire, acid, gas or liquid.
- Do not expose to sunlight when not in use.
- Do not keep it in water.
4
handleiding_EV-kabels.indd 4 handleiding_EV-kabels.indd 4
Spiral cable
* Depending on model
20-12-2021 14:37 20-12-2021 14:37