Scubapro NOVA 1000R WIDE Manual De Instrucciones página 4

INSTRUCTIONS
Make sure to not over tighten the casing as this
could result in premature wear and/or damage
to the O-rings.
*NEVER USE A TOOL OF ANY KIND TO
TIGHTEN THE CASE*
To turn ON the SCUBAPRO Nova 1000R
WIDE un-lock the light first by quickly
pressing the button 5 times within 3 seconds
until the blue standby-indicator light is turned
on. Then press the button for half second and
the light turns on. To switch from 100% to
50% mode press the button once. Pressing
the button again will turn off the light and the
blue standby- indicator lights is turned on
again. To lock the Nova 1000R WIDE for
storage or travel quickly press the button 5
times or more within 3 seconds during
standby.
Battery selection
We recommend using only high quality batteries.
Low quality batteries can cause off-gassing and
damage to the internal electronics. The light is
fitted with an overpressure valve for your safety.
In case the battery produces gas leading to a
high internal pressure of the light, the valve will
open. This may cause water to enter the light.
! WARNING
Do not look directly into the light, or direct
the light into the eyes of others. Do not
alter or modify the dive light. If modification
causes water entry or other malfunctions,
the warranty will be void.
Proper storage: if the dive light is not to be
used for a long period of time, remove batteries
4