ROBBE POWER PEAK TRIPLE 360 W EQ-BID Manual De Uso página 31

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
POWER PEAK® TRIPLE 360 W EQ-BID
• The START button is pressed to start the selected operation, e.g. CHARGE.
• After connecting to the supply voltage, this button is used to select
"manual mode" (MANUAL).
• The 'INC' button is also used to select the required language (see chapter 5).
STOP / ENTER BUTTON
• A current operation, e.g. CHARGE, can be terminated by pressing the STOP button.
• The ENTER button confirms a selection, e.g. activation or deactivation of a selected
menu.
All buttons have an Autorepeat function so that the respective function is repeated-
ly switched when the button is held pressed.
4. Technical specification (details refer to each charge output)
Operating voltage:
Cell count:
Charging current:
Discharging current:
Equalizing current:
Charging power:
Discharging power:
Trickle charge:
Cut-off voltage:
Charge Cut-Off:
NC/NiMH:
Lead and lithium:
Dimensions:
Functions:
© robbe Modellsport
Operating instructions
4.8 - 6 V
(Do not use as a car battery charger!)
1 ... 14 cells NC/NiMH,
1 ... 6 cells LiIo (3.6 V), LiPo (3.7 V), LiFe (3.3 V)
1 ... 6 cells (2...12 V) lead-acid battery
0.1 ... 10 A at max. 120 W
0.1 ... 1 A at max. 5 W
max. 300 mA
120 W, current is controlled to suit
e.g. 28 V battery voltage, charging current approx. 4.2 A
5 W, current is controlled to suit
Charged capacity <1 Ah: No trickle charge
Charged capacity >1 Ah: Trickle charge at C/20
(only with NC and NiMH)
0.8 V per cell for NC and NiMH,
3.0 V per cell for LiPo, Lilo
2.5 V per cell for LiFe
1.8 V per cell for lead batteries
automatic, digital Delta-Peak system
automatic, voltage-dependent, CC-CV method
est. 270 x 195 x 50 mm
Charge, discharge, discharge-charge, balance
10 internal memory locations
7
Order No.
8562
Tabla de contenido
loading

Este manual también es adecuado para:

8562

Tabla de contenido