Idiomas disponibles
Idiomas disponibles
Use of the floor brush / carpet carpet
For cleaning terrazzo, platelet, floor, etc. floors. use the floor brush E, with
the lever in the "
If the floors are carpeted or carpeted, press the lever with your foot, placing
it in the "
aspiration on the fabric.
To return to the brush position, press the lever with the foot towards the
"
" position.
Note: To avoid static electricity that can be generated when rubbing on
carpets, carpets, etc., be careful not to vacuum very fine dust particles for a
long time, thus avoiding the possible accumulation of static electricity in the
extension tube.
Using the double nozzle (fine + brush)
To clean window frames, holes or places that are not easily accessible, use the
double nozzle (fine + brush).
Switching the vacuum on and off
To turn on the vacuum press the on / off switch A. Once the use is finished,
press the on / off switch A to turn off the vacuum. Then unplug the power cord.
CLEANING AND MAINTENANCE
To obtain the best results during the cleaning process it will always be
necessary that both the tank and all the filters are perfectly clean. If you
proceed to the work of using the vacuum cleaner and these elements are dirty,
the suction power will decrease considerably. Never operate the vacuum
cleaner without all filters being correctly positioned and completely clean,
otherwise dirt particles can penetrate inside the vacuum cleaner causing
engine damage.
" position.
" position, so that the brush is hidden and thus facilitates
