Winntec Wheel Assist+ Manual Del Usuario página 3

When picking wheels up off the ground
1. Place the wheel with the outside of the wheel facing the frame: Roll the wheel onto
the rollers via the ramp.
2. To lift the load, use your foot to pull upwards on the locking bar to disengage the lock
on the bottom of the frame.
3. It is possible to stop the Wheel Assist at any height by turning the locking mechanism
(located on the right side of the lifting frame) in a clockwise direction.
4. To lower the lifting frame, lower the foot pedal extension and push the frame down
firmly using your foot until the bottom lock is secured.
When taking wheels from a rack or vehicle
1. Use your foot to pull upwards on the locking bar to disengage the lock on the bottom
of the frame.
2. Allow the frame to reach the desired height with the rollers underneath of the load
and then engage the clamp brake on the right side of the frame.
3. To lower the load, disengage the clamp break and firmly press down on the lowered
foot pedal until het bottom lock is secured.
Instructions for Use
(English)