Idiomas disponibles
Idiomas disponibles
USE
1Sanitizes as per NSF/ANSI standard 184 for residential
dishwashers.
2Shortened cycle time impacts drying performance.
MENU SETTINGS
Press the Extra Dry button (6) for 3 seconds to enter the
menu. The water hardness setting (e.g. SL1) will appear on
the display. Press the Delay buttons (4) to navigate the
menu. Then, press the Half Load button (5) to enter the
levels of the setting you want to change in the menu. Now,
the display (3) will start flashing, which means this setting
can be changed by pressing the Delay buttons(4). Set the
new level with the Delay buttons(4) and press the Half Load
button (5) to save the new level. After that, the display (3)
will light up steadily, which means this setting level is
saved. You can change another setting with these steps or
exit the menu by pressing the Extra Dry button (6) for 3
seconds or turning off/on.
No
SETTING
Water
1
Hardness
2
Rinse-aid
Buzzer
3
Sound
Control
Start
4
Program
Save Power
5
Mode
Factory
6
Settings
36
DESCRIP-
OPTIONS
TION
SL1
SL2
Set the
SL3*
water
SL4
hardness.
SL5
SL6
r:1
r:2
Set the
amount of
r:3
rinse-aid.
r:4*
r:5
b:0
Set the
b:1
buzzer
b:2
sound level.
b:3*
LP0*
Set a
default
program for
when the
LP1
appliance is
switched on.
SP0
Set Save
Power
SP1*
Mode.
SP2
FS0*
Restore
changed
settings to
FS1
factory
settings.
*Default setting
