dBTechnologies IA 504R Manual De Uso página 36

English
MONITORING
From the Input section, you can monitor the input signal levels, set the gain and delay time, solo, mute, invert the
polarity and link channels 1-2 and 3-4 together. The Link control affects the entire processing chain.
By default, Gain is set to 0 dB, Delay to 0 ms and the channels are not linked.
From the Processing section, you can monitor the signal levels and compression in the processing channels, solo,
mute, invert the polarity, apply a delay and link channels A-B, B-C and C-D. The Link control affects the entire
processing chain. The compressor meter refers to the compressor enabled in the Limiter => Processing Channels
section.
By default, Gain is set to 0 dB, Delay to 0 ms and the channels are not linked.
IA540R
Cod. 420120398 REV. 1.0
36