17. DC 5V IN
18. Platter
19. 45rpm adapter
This adapter allows you to play 45RPM records
20. Tone arm lever
Use to raise/lower the tone arm
21. 33 / 45 / 78 RPM switch
Use to adjust the RPM of the turntable platter
22. Autostop switch ON/OFF
This switch turns the auto stop-function on/off. When the automatic stop is enabled, the platform will start rotating as
soon as the tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some
vinyl records stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF
23. Tone arm
24. Arm clip
This arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up
position whilst unlocked
25. Stylus cartridge
Cartridge containing the stylus/needle
• Remove the radio record player from the package box.
• Plug in the power adapter and press [Power].
Caution: Use only the adaptor supplied with the unit. Connecting a power supply with a different rating can cause permanent
damage to the unit and may be hazardous.
If there is Digital Audio Broadcasting (DAB) in your area, the unit can pick up the DAB stations. The radio supports both DAB
and DAB+.
Place the radio close to the window and unwind the antenna to get the best reception. Sometimes you may need to adjust the
direction of the antenna to improve reception.
Press [Mode] to select DAB mode. Press [Tune/Select] to confirm and enter the DAB mode.
Auto scan: Press and hold [Scan/Play]. The display will show "Scanning...", the device will automatically scan for available
stations. The radio will start to play the first found station automatically after completing the scan.
Rotate the [Tune/Select] knob to open the station list and select another DAB station. Press [Tune/Select] to confirm.
Station presetting: While playing in DAB mode, press and hold [Preset/Repeat]. Rotate [Tune/Select] to select the desired
preset slot (1-30), press [Preset/Repeat] to store. The display will show "Preset # Stored".
Press [Preset/Repeat] to recall memory. Rotate [Tune/Select] to select the stored station you want to listen to. Press
[Tune/Select] to confirm.
Show channel information: Press [Menu/Info] to show various forms of information regarding the station that is being played.
DAB settings:
When in DAB mode, press and hold [Menu/Info] to enter the settings menu. Rotate [Tune/Select] to be able to select the
following properties:
• Full scan: Automatic full channel search/scan for DAB stations. Once completed, the device will automatically start playing
the first found station.
• Manual tune: Enables manually tuning into a DAB station. Rotate [Tune/Select] to change the frequency. Press
[Tune/Select] to confirm and play.
• DRC (Dynamic Range Control): When listening to music with high dynamic range in a noisy environment, you can compress
the audio dynamic range. Rotate and press [Tune/Select] to select off/high/low.
• Prune: Enables clearing invalid/unavailable stations. Rotate and press [Tune/Select] to select yes/no.
• System: Identical to "System settings" menu.
To receive the ordinary FM stations, place the radio close to the window and unwind the antenna to get the best reception.
Sometimes you may need to adjust the direction of the antenna to improve reception.
Press [Mode] to select FM mode. Press and hold [Scan/Play], the radio will start searching for stations. "Auto Scanning..." will
show on the display. The device will automatically scan for available stations. The radio will start to play the first found
station automatically after completing the scan. If reception is not as desired, use the [Tune/Select] knob to manually fine
tune frequency.
Station presetting: While playing in FM mode, press and hold [Preset/Repeat]. Rotate [Tune/Select] to select the desired
preset slot (1-30), press [Preset/Repeat] to store. The display will show "Preset # Stored".
Press [Preset/Repeat] to recall memory. Rotate [Tune/Select] to select the stored station you want to listen to. Press
[Tune/Select] to confirm.
7