Idiomas disponibles
Idiomas disponibles
● HOW TO USE
1.Unlock the Flip leg locks one by one, extend all the legs to the height
you need and then lock them all
——Place it on the ground and adjust it to be balanced to avoid tripod tilt.
2.Unlock the Center column locking knob to increase the height.
——You can adjust from 16-55 inch (0.41m-1.40 m) by shortening /
extending the length of the legs or center column
3.Lock all knobs tightly-please confirm that the brace system is fully
expanded before installing your camera to avoid its falling
4.The Level can be confirmed by reviewing the built-in bubble
5.One-click to Remove the Quick-Release Plate, install your camera,
phone, laser measure, laser level, or other product on the plate-and then
install the product with a plate on the tripod
Note: Failure to properly secure the Flip leg locks may cause the tripod
legs to retract unexpectedly and may damage the tripod or the camera
mounted on it.
● Important Safety NOTES
1.Before installing the camera or other products on it, please confirm that
the tripod has been placed stable. Lock ALL knobs well to avoid the
tripod's tilting and falling down.
2.Do not carry or transport the tripod with camera/other expensive goods
attached to it(for example, you should not carry it on your shoulders or in
your arms to move)-to avoid the valuables' falling from the tripod
3.Do not store or expose your tripod in an overheating or supercooling
environment, or use it near any flame or fire.
4.Do not OIL or GREASE any part of the tripod.
5.Wipe off debris using a moist and soft cloth. Do not use any cleaning
agents or solvents.
6.Do not exceed the load limit of this product.
Note: One leg of the tripod facing forward and the person standing
between the two legs of the tripod - this is a more stable angle to prevent
you from knocking it down and causing it to fall.
02
