Blaupunkt BP2004 Manual De Instrucciones página 7

Ventilador industrial de suelo
Idiomas disponibles

Idiomas disponibles

You can tilt the fan or hang it according to the desired position.
NEVER TOUCH THE ASPAS WITH THE HANDS OR ANY OTHER OBJECT.
Do not strain the cable too much. If the cable deteriorates after prolonged use, it must be replaced
by qualified technical service personnel.
To clean it, disconnect the cable from the plug. Remove the front grille and the blades very carefully.
Take care Don't hit the blades. First rub with a soft cloth soaked in light soap and then dry carefully
with a dry cloth. Never use corrosive liquids that could damage the paint, the metal or the plastic
Replace the blades, the front grille and then securely screw.
CAUTION
Read these instructions carefully before operating the fan.
Do not leave plastic bags or packaging items within the reach of children.
Do not connect without ensuring that the voltage indicated on the nameplate of the appliance and
that of your home match.
EN
Verify that the plug base has an adequate ground.
Never insert your fingers or any object through the grilles.
Do not leave it within reach of children.
Do not use with any control device or programmer that can operate it automatically.
Never place the circulator in a window, because rainwater could cause a short circuit.
This device is not intended for use by persons (including children) whose physical abilities, sensory
or mental are reduced or lack experience or knowledge, unless they have had supervision or
instructions regarding the use of the device by a person responsible for its safety.
Children should be supervised to ensure they play with the device.
Do not cover the device.
Do not use outdoors.
Never immerse it in water.
Never use it without the front grille properly positioned.
Do not use it in places where gas appliances are running.
If the power cable is damaged, it must be replaced by a special cable or assembly to be supplied by
the manufacturer its after-sales service.
MAINTENANCE AND CLEANING
Before cleaning, make sure the appliance is disconnected from the mains and the blade completely
stop.
You can clean the exterior with a slightly damp cloth.
If you want to clean the interior parts, you must first remove the front grill. To do this you must
remove the screw safety bottom and the hooks that hold the front and rear grille, once removed
proceed to the cleaning.
Clean the inside with a slightly damp cloth, except for the motor that should always be cleaned
With a dry cloth.
Do not use chemical or abrasive products, metal scourers, etc. that may deteriorate the surfaces.
If you are not going to use the fan for a long period of time, clean it and store it in a plastic bag or
in a box.
7
loading