Step 6
O
To properly balance the arm with monitors mounted, adjust the spring tension using the
supplied Allen Key as following:
First, position and firmly hold the arm
horizontally as shown. Ask for assistance
should require it.
CAUTION: To avoid damange to
monitors or mount, always keep
the arm in a horizontal position
while making adjustments. Again,
ask for assistance if required.
If the arm rises, turn the adjustment
screw counter-clockwise until it stays in
a horizontal position.
If the arm drops, turn the adjustment
screw clockwise until it stays in a
horizontal position.
CAUTION:
•
Do not over tighten the
screws.
•
To prevent damage to the
tension indicator, never
allow the red indicator line
move beyond the "+" and "-"
found on the left and right
side of the display window.
7
