Maximum And Minimum Values; Battery Replacement - TFA 35.1147 Instrucciones De Uso

TFA_No. 35.1147_Anleitung 06.10.2017 9:33 Uhr
COLORIS – Wireless weather station
• The weather forecast covers a range of 12 hours and indicates only a general weather trend. For example, if the current weather is cloudy
and the rain symbol is displayed, it does not mean the product is faulty because it is not raining. It simply means that the air pressure has
dropped and the weather is expected to get worse but not necessarily rain.The accuracy is about 75 %.
• The sun symbol also appears on a starry night.
Note!
Please note that the forecast symbol will become more defined in the course of operation. The forecast symbol is active right from the start,
however, the reliability of the forecasts increases with the amount of data collected.
Attention: The weather forecast will not be transferred to the WeatherHub app.
11. Temperature and humidity

11.1 Maximum and minimum values

• Press the +/RESET MIN/MAX button in normal mode.
• The minimum values measured since the last reset appear on the display.
• Press the +/RESET MIN/MAX button again.
• The maximum values measured since the last reset appear on the display.
• Press the +/RESET MIN/MAX button once more, to go back to the current values display.
• Press and hold the +/RESET MIN/MAX button for 3 seconds to clear the recorded values.
12. Setting of the WeatherHub connection (only in conjunction with the WeatherHub system)
• You can connect the base station with the WeatherHub System gateway (not included). Your data will be transmitted wirelessly through the
gateway and the Internet directly to a server. Once connected, you can monitor the values measured at your home on your smartphone.
32
Seite 17
COLORIS – Wireless weather station
• Open the WeatherHub App and the overview will be displayed. Tap "Add new sensor" and scan the QR code on the back of the base station.
• For more information and a detailed description, go to www.tfa-dostmann.de/weatherhub.
13. Positioning and mounting of the base station and the transmitter
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measurement and continuous
humidity damages the electronic components needlessly.
• Place the base station in any room of the house. Make sure you avoid the vicinity of any source of interference such as computer screens, TV
sets or solid metal objects.
• Once the desired location is chosen, check whether the transmission from the transmitter to the base station is possible (transmission range
of up to 100m in open areas). Within solid walls, especially ones with metal parts, the transmission range can be reduced considerably.
• If necessary choose another position for the transmitter and/or base station.
• Once the transmission is successful, you can wall mount the transmitter or place it onto a flat surface.
14. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries from the transmitter if you do not use the products for a long period of time.
• Store the devices in a dry place.

14.1 Battery replacement

• Change the batteries of the outdoor transmitter, when the battery symbol appears on the outdoor values display.
• Please note: When the batteries are changed, the contact between the transmitter and the base station must be restored – so always start a
manual transmitter search or restart the instrument according to the manual.
33