Control Panel; Operation Method - HAEGER DE-016.008A Instrucciones De Uso

Control Panel

Notes:
- Water tank must be correctly installed for the dehumidifier to operate.
- Do not remove the tank while unit is in operation.
- If you want to use drain hose to drain water away, please install the hose
according to section "continuous external draining".

Operation Method

-
Power button
Press this button to turn the dehumidifier on or off. First time to turn on, by
default, the mode is dehumidifying automatically and low wind.
-
Mode button
When power or timing is on, press this button to choose auto dehumidifying or
continuous dehumidifying mode (dry cloth function). There is 2 seconds delay
for choosing any mode.
The humidity level can be set within a range of 30% RH (Relative Humidity) to
80% RH (Relative Humidity) in 5% reduce or at continuous operation.
NOTE:
- If
maximum dehumidification settings if attached to a hose to drain or until
the water tank is full.
- For drier air, press the down button and set to a lower percent value
(%).For damper air, press the up button and set to a higher percent value
Instructions for use
-
Adjustable humidity Button
is selected, the dehumidifier will operate continuously at its
English
5