HAMPTON BAY 465-003 Manual De Instrucciones página 4

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING:
Bulb will not light.
Fuse blows or circuit
breaker trips when
light is turned on.
PRODUCT MAINTENANCE:
1. To clean simply wipe with a soft dry cloth.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives.
The manufacturer warrants this portable luminaire to be free from defects in
materials and workmanship for a period of one (1) year from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective,
the manufacturer's only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer's discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling. This warranty shall not apply to any product
that is found to have been improperly installed, setup, or used in any way not in
accordance with the instruction supplied with the product. This warranty shall not
apply to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, or faulty installation, or any other failure not relating to
faulty material or workmanship. This warranty shall not apply to the finish on any
portion of the product, such as surface and/or weathering, as this is considered
normal wear and tear. The manufacturer does not warrant and specially
disclaims any warranty, whether express or implied, of fitness for a
particular purpose, other than the warranty contained herein.
manufacturer specifically disclaims any liability and shall not be liable for
any consequential or incidental loss or damage, including but not limited to
any labor / expense costs involved in the replacement or repair of said
product.
Page 4
Possible Cause
1. Bulb is burned out.
2. Power is off.
3. Cord not plugged in.
4. Circuit breaker off.
1. Exposed wire
LIMITED WARRANTY
Corrective Action
1. Replace light bulb.
2. Make sure power supply is
on.
3. Make sure cord is plugged
into the outlet.
4. Make sure circuit breaker is
to the 'on' position.
1. Discontinue use. Unplug
unit from the wall and
contact a qualified electrician
or call the Home Depot
Customer Service Team at
1-877-527-0313.
The
loading