Set up trailer operation
45
a
b
d
e
Lamp substitution if the trailer indicators fail
The failure of a trailer indicator (right left or both sides) is reported to the driver in the towing vehicle's combi-instrument
via a text message in the display, an increase in the flashing frequency and/or a control lamp for light failure
coming on.
If an indicator fails the left or right rear tail light compensates for the faulty indicator by flashing at the correct frequency!
If the indicator is activated, the corresponding rear tail lamp on the trailer becomes the indicator
(
lamp substitution): NOTE! The lamp substitution does not work i
activated.
/
87010994/16.01.2018
PFJones ltd, Nuttall street, Old Trafford, Manchester, M16 9JA, Tel- 0161 872 4755 email- [email protected] web- www.pfjones.co.uk
Diagnosis function of control LEDs
GN
RD
GN
RD
or
RD
RD
No CAN-Data
c
PIN 13+14
CAN-Data Wire
/31:
PIN 1
2 x B+/30:
PIN 2 + 4
f the Hazard warning lights have been
Please effect coding as follows:
Guided troubleshooting
Skip
• Function / component selection
• Select the "Direct input of AM code for vehicle
alteration" (Direkteingabe AM-Code fur
Fahrzeugumbau) testing programm from within
Action Management (AM).
Done
• Enter AM code
The necessary AM code can be found in the
"Coding sheet" in the Audi dealer portals (incl.
ServiceNet).
=
Sleepmode
GN
Standby /
18/19
