Idiomas disponibles
Idiomas disponibles
1.7 Handling precautions
Be sure to observe the following precautions to ensure that the server functions properly. Ignoring
these precautions may cause server malfunction or failure.
Installation site
• Install the server in an appropriate place. See Chapter 2 Preparations (2. Installation and
Connection) in User's Guide.
• Switch off all cell phones and PHS devices in the proximity of the server. Electric waves from
these devices can cause the server to malfunction.
• Regularly clean the server to prevent failure. Refer to Chapter 1 Maintenance (2. Daily
Maintenance) in Maintenance Guide for information about cleaning.
• When storing the server for a long time, be sure to satisfy the storage environment conditions
(temperature: −10 to 55°C, humidity: 20 to 80%, non-condensing).
• Turn off the server and unplug the power cord before moving it.
• In the following cases, check and adjust the system clock before operation:
- After transportation
- After storage
- After the server is used following a period of disuse, in which the storage conditions did
not conform to the conditions that guarantee server operation (temperature 10 to 40°C,
humidity 20 to 80%)
• Check the system clock approximately once per month. Use of a time server (NTP server) is
recommended if highly accurate timing is required by the system.
Power supply
• An uninterruptible power supply (UPS) is used to prevent momentary voltage drops. The server
does not support UPS connection through the serial port (RS-232C) or power control by
PowerChute Plus.
10
Chapter 1. Precautions for Use (EN)
