6.
If you need to enter the IP Address, Subnet Mask, Gateway, and DNS manually, press the [User
Config] button on the IP Address screen. Then, select the [IP Address], [Subnet Mask], [Gateway],
and [DNS] buttons in turn and, using the keypad, enter the appropriate values. When you are done
with each entry, select the [OK] button on the keypad.
7.
After entering the values for all four parameters, press the
[Apply] button.
TEMPERATURE UNIT CONVERTER
Lets you set the temperature display to Fahrenheit or Centigrade. The unit you select applies to the
Freezer / Fridge set temperature and the temperature displayed by the Weather function.
1.
Press the
button in the bottom right corner of the Settings list.
2.
Select the Temperature Unit Converter °C or °F button in the Settings list.
USA
CANADA
88_ operating
DA68-02935A-10.indb 88
2018. 7. 9.
4:54