Messoa NCR770 Guia De Inicio Rapido página 7

2. RJ-45 (PoE): Connect to the LAN port of a standard 10BaseT/100BaseTX
device, e.g., hub, switch or router. If you are going to use PoE function,
connect to a PoE-capable network device. Power will be supplied through the
Ethernet cable.
3. BNC: Connect to composite video in connector of a monitor.
2.3 Initial Configuration
Before connecting the camera to your network infrastructure, it's suggested that
you connect the camera to a computer first to perform initial configurations.
1. Configure the computer's IP address to one other than the camera's default
IP address, such as:
• IP Address: 192.168.1.100
• Subnet Mask: 255.255.255.0
2. Usning an Ethernet cable, connect the camera to the computer.
The LAN port of the camera supports auto MDI/MDIX so there is no need to
use a cross-over cable.
3. On the PC, launch a web browser and enter the IP address of the camera in
the URL field:
http://192.168.1.30
4. When prompted for login, enter the default user name: admin and
password: 1234 to login. Note that the user name and password are case-
sensitive.
5. Configure the settings to meet your requirements. For more information,
refer to the User Manual on the provided CD.
All manuals and user guides at all-guides.com
Quick Start Guide 5