Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

welcoming • sophisticated • inspiring
allen + roth
is a registered trademark
®
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday - Friday.
VANITY WITH TOP
MODEL # LWSK72VG, LWSK72VW
Français p. 9
Español p. 17
1
PACKAGE CONTENTS
PART
C
A
B
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
WARNING
Do not stand on vanity. Use vanity on level ground. Base
vanity supports a maximum weight of 200 lbs. Exceeding
maximum weight limit will compromise the integrity of the
vanity structure and could cause the vanity to fail.
CAUTION
Failure to follow cautions could result in serious injury.
Do not hang from the vanity.
Do not taking off the vanity top to avoid damaging the vanity.
Clean all fluids from the stone surface to prevent stains. Wipe off the soap or toothpaste immediately to prevent
permanent damage to the stone surface.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required (not included): Silicone compound, Phillips screwdriver, Level, Stud Finder, Pencil, Variable Speed Drill.
DESCRIPTION
QUANTITY
A
Vanity Top
1
B
Vanity Base
1
C
Backsplash
1
Maximum load 200 lb. (90.71 kg)
Maximum load 10 lb. (4.5 kg)
Maximum load 30 lb. (13.6 kg)
2
Tabla de contenido
loading

Resumen de contenidos para allen+roth LWSK72VG

  • Página 9: Descripción

    Limpie todos los fluidos de la superficie de piedra para evitar las manchas. Limpie el jabón o la pasta de dientes inmediatamente para evitar daños permanentes a la superficie de piedra. MODELO # LWSK72VG, LWSK72VW PREPARACIÓN ADJUNTE SU RECIBO AQUÍ...
  • Página 10: Instructivo De Ensamble

    INSTRUCTIVO DE ENSAMBLE INSTRUCTIVO DE ENSAMBLE Paso 1: Paso 4: Retirar la tapa de piedra y el material de envió bajo la Mueva el tocador (B) hasta su ubicación adecuada contra tapa de piedra. la pared. Paso 2: Paso 5: a.
  • Página 11 INSTRUCTIVO DE ENSAMBLE INSTRUCTIVO DE ENSAMBLE Paso 7: Paso 10: Si necesita remover el cajón: Para montar el protector contra salpicaduras (C) en la Silicona pared, aplique una cantidad pequeña de compuesto de a. Remueva totalmente el contenido del cajón. silicona (no se incluye) en la parte posterior sin pulir y b.
  • Página 12: Mantenimiento Y Cuidados

    PARTE DESCRIPCION PARTE # madera inmediatamente con un paño o toalla suave. Protector contra salpicaduras 00 LWSK72VG/VW-01 • La tablero de piedra ingeniería se puede limpiar con limpiadores para piedra ingeniería estándar (se venden por separado). Perilla con perno 00LWSKVG/VW-02 •...

Este manual también es adecuado para:

Lwsk72vw

Tabla de contenido