Panasonic DC-BGH1 Instrucciones De Funcionamiento página 17

Ocultar thumbs Ver también para DC-BGH1:
Idiomas disponibles

Idiomas disponibles

Recording format for video
Video format
Audio format
Image quality for
video
Interface
[REMOTE]
[DC IN 12 V]
[MIC]
Headphones
LAN connector
[SDI OUT]
[TC IN/OUT]
[GENLOCK IN]
HDMI
USB
MP4 (H.264/MPEG-4 AVC, H.265/HEVC)
MOV (H.264/MPEG-4 AVC, H.265/HEVC)
MP4: AAC (2ch)
MOV: LPCM (2ch, 48 kHz/16-bit) 
2 When an XLR Microphone Adaptor (DMW-XLR1:
optional) is attached, LPCM (2ch, 48 kHz/24-bit,
96 kHz/24-bit) can be selected
Refer to "Owner's Manual" (HTML/PDF) (1).
Ø2.5 mm jack
Terminal for generic remote control unit
(A Panasonic shutter remote control (DMW-RS2) cannot
be used.)
DC 12 V (11.4 V to 12.6 V) EIAJ Type 4
Ø3.5 mm stereo mini jack
Ø3.5 mm stereo mini jack
LAN terminal (RJ-45) for remote control ×1, compatible
with power supply by PoE+ (IEEE 802.3at compliant)
• Use a PoE+ (IEEE 802.3at compliant) compatible
switching hub or power supplying device. 
3 Make sure it complies with the safety standards IEC
60950-1 or IEC 62368-1.
If you are uncertain on whether or not it complies
with the safety standards, please contact the
manufacturer of the switching hub or power
supplying device.
BNC terminal ×1, 0.8 V [p-p], 75 Ω, 3G-SDI compatible
BNC terminal ×1
BNC terminal ×1, BBS (Black Burst sync) signal and
tri-level sync signal compatible
HDMI Type A
USB Type-C™, SuperSpeed USB3.1 GEN1
Specifications
2
3
DVQX2125 (ENG)
17
loading