Idiomas disponibles
Idiomas disponibles
To operate your electric wine opener
The electric wine opener is operated by one single switch. The switch has two
functions:
– Press the lower part of the switch to remove a cork from a bottle.
– Press the upper part of the switch to release a cork from the mechanism
after you have removed from the bottle. (see Fig.1)
Before removing the cork, you must remove any foil from the bottle using the foil
cutter provided. (see Fig.2)
1. Place the electric wine opener on top of the wine bottle making sure that it
remains as upright as possible at all times. If you hold the electric wine
opener at an angle to the bottle it will not remove the cork properly. (Fig. 3)
2. Hold the electric wine opener firmly and depress the lower part of the
switch. The corkscrew spiral will turn in a clockwise direction and enter the
cork, then gradually remove it from the bottle. When the electric wine
opener mechanism has stopped the cork has been fully removed from the
bottle.
3. Lift the electric wine opener away from the bottle to remove the cork simply
depresses the upper part of the switch. The spiral will turn in an anti clockwise
direction and release the cork. (Fig. 4)
Note: It has been noted that the electric wine opener may experience
problems with a small percentage of plastic/synthetic corks and undersized
corks. In this case the cork should be removed manually.
Technical Data
AC/DC Adaptor
Model: ..................................YLJXA-E060008
Input voltage: .....................230V~50Hz
Output Voltage: .................6.0V DC
Output current: ...................80mA
Protection Class: .................II
Conformity
This product has been tested and produced according to all relevant current
CE guidelines, such as:
-
electromagnetic compatibility Directive 2014/30/EU,
-
Low voltage Directive (LVD) Directive 2014/35/EU,
-
RoHS with its amendments Directive 2011/65/EU,
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives.
Instructions for use
Corkscrew
Input voltage: .....................6,0V DC
Input current: ......................80mA
Rechargeable battery: .....3,6V
Power: ..................................2W
English
3
