Power On/Off - Bontempi iGirl 40 1040 Manual De Instrucciones

HOW TO ASSEMBLE THE MIC STAND
1. Place the adjustable microphone stand into
the relative seat in the base.
2. Insert the microphone into the microphone
holder.
3. Adjust the height of the stand by sliding the
central part.
4. Adjust the microphone according to the
desired angulation. You can use the micro-
phone both keeping it in the holder or in
hand.
5. Plug the microphone cable into the jack
MIC/IN located at the base of the stand.

POWER ON/OFF

Switch on the instrument turning the knob (6)
and adjusting the volume at the desired level.
Move the switch off the microphone on to turn
it on ON and on OFF to switch it off. When the
instrument is not being used, in order to pre-
vent unnecessary consumption of the batteries,
always remember to switch it off by turning the
knob (6).
SOUND EFFECTS AND DEMO
The sound effects can be activated by pressing the pad (A). To listen to the pre-recorded
melodies press the buton MUSIC (B) in succession.
HOW TO SING ALONG THE MUSIC
With the provided cable (C) you can connect an exter-
nal audio source (MP3 player, iPad, smartphone, etc.,
not supplied) to the stage microphone.
1. Insert the cable into the MP3 (D) socket.
2. Insert the other end of the cable into the
"HEADPHONE" socket of your music player or other
audio source.
3. Turn on the player, or other music sources and
adjust the volume to balance the voice with the
music; the reproduction will be monophonic becau-
se of the instrument.
CAUTION!
To avoid annoying hoots, do not put the microphone close to the speaker.
6
C
B
D
A
A
3