Idiomas disponibles
Idiomas disponibles
ENGLISH
INSTRUCTION MANUAL
Model:
CPV-TR10
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
120-127 V~
Brand:
VORTEX
NP:
2104080072
Important Safety Meassures
When using electrical appliances, you should take basic safety precautions to reduce the risk of fire, damage to your property,
electrocution or wounds, including:
1.
READ THESE INSTRUCTIONS
2.
Completely assemble this appliance according to the instructions before connecting it to the power supply.
3.
Use this appliance as described in this manual. Any other use is not recommended by the manufacturer and may result in fire,
electric shock or injury.
4.
Do not place the appliance on an uneven surface. Do not place the appliance on a surface smaller than the appliance itself,
otherwise this may cause it to fall and damage property and injure someone.
5.
To reduce the risk of injury to people or electric shock, do not place the appliance within reach of children or allow them to
play near it.
6.
Make sure that the power supply is compatible with the electrical specifications of the appliance.
7.
Do not insert any other objects into any ventilation or exhaust opening as this may result in electric shock and/or fire.
8.
Do not use in areas where gas, paint or other flammable materials are present that are used or stored.
9.
Do not use near curtains, fabrics or fabrics that may block or obstruct the appliance's guards.
10.
Do not use the appliance if the cable or plug is damaged, or after the appliance does not work properly, has been damaged in
any way or has been damaged.
11.
Do not try to make contact with the moving blade.
12.
Position the cable so that no object rests on it.
13.
Arrange cord away from traffic area where power cord will not be tripped over.
14.
Use the appliance only in dry environments. Do not place the appliance in a bathroom, laundry room, near sinks, washing
machines, swimming pools or other sources of water.
15.
Do not use the appliance outdoors.
16.
Avoid using electrical extensions. If an extension should be used, make sure that it is UL and NOM certified and that it does not
connect more than one extension to an Air Circulator.
17.
This appliance is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confi-
ned. Please refer to National Electric Code (NEC) article 547-7 (2008), or applicable state or local codes or standards relating
to electrical requirements for Agricultural Buildings. This appliance does not meet the requirements of NEC article 500 (2008).
18.
Do not attempt to open or disassemble the appliance.
THIS APPLIANCE IS DISIGNED FOR HOUSEHOLD USE ONLY. USE INDOORS ONLY.
WARNING: To reduce the risk of fire, electrical shock, in-
jury to persons and/or property do not use this appliance
near a window.
Contents
Oscillation Buton
Speed Selector
Tube Clamping Knob
Air Circulator
Hood
Elevation Tube
Tube guide
top pedestal base
bottom pedestal base
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
WARNING
WARNING: To reduce the risk of fire, electrical shock, in-
jury to persons and/or property do not use this appliance
with any solid state speed control device.
Wall Fixing Hook
Positioning Knob
(left and right)
Floor base tube
Maintenance & Cleaning
•
Always disconnect the fan from the Electrical Outlet before servicing and cleaning.
•
This product has been lubricated since fabrication and requires no additional lubrication. Additional lubrication increases
the risk of fire, electrical shock and injury to persons and/or property.
•
To clean use a damp cloth on the outside of the appliance. Dry thoroughly before plugging in again and operation. Only
dampen with water, do not use any other liquid.
Operation Instructions
Only connect the power outlet to a power source with 120 to 127 V
1.
Remove the Air Circulator from the carton.
2.
Place the Air Circulator on a flat, leveled surface.
3.
To reposition the airflow direction, loosen the positioning knobs on each side of the grill and tilt in the desired position.
Tighten the knobs to fix the position. Always do this while the fan is OFF.
4.
Before operating this appliance, first make sure the speed selector is place in 0 or OFF position then Connect the power
outlet to a power source that supplies 120-127 V~, 60 Hz. Make sure that the plug fits perfectly into the power outlet and
that no metal part is exposed.
5.
To turn on, use the speed dial to select the desired speed:
1
Low
2
Medium
3
High
6.
To turn off, turn the Speed Selector and select 0.
7.
Press the oscillation buton to activate oscillation. To deactivate, pull the oscillation buton vertically.
Be sure that the plugs fits tightly into the outlet. A loose fit between outlet and plug may cause
overheating and/or fire which may lead to personal injury or property damage.
Wallmount
•
This Air Circulator must be mounted on a vertical,
flat and solid surface and must be sure to use the
appropriate tools.
•
To mount the wall mount you will need a drill, a
1/4" (6.4 mm) bit, a phillips screwdriver, a level
and a hammer (equipment not provided).
•
To install the wall fixing hook secure the two
screws provided in the holes of the same by hol-
ding them firmly on a flat, firm wooden wall.
•
WARNING: To reduce the risk of electric shock
and/or perssonal or material damage, the wall-fi-
xing hook should be attached only to a solid wood
surface capable of supporting the circulator.
•
When mounting the Air Circulator on the wall,
make sure that the cable passes between the air
circulator and the base.
•
It is recommended that a qualified electrician
attach this fan to the wall.
•
Follow the steps to assemble the floor and wall
base and hang the fan from the hook fixing floor
base tube wall.
READ AND KEEP THESE INSTRUCTIONS
CPTIM0003 R01
Night / Sleep Mode
Fresh Breeze
High Air Circulation
WARNING
Pedestal Assembly
•
Place the top pedestal base over the bottom pedestal
base, these must be properly attached to the slots of
both parts, remove the 4 screws from the crosses.
•
Hold the tube guide over the bases, make sure the pipe
boreholes match the base boreholes.
•
Place and tighten the 4 screws by firmly holding both
parts.
•
Remove the height fixing knob and insert the hood into
the guide tube and place it over the assembled base and
return to place the height locking knob.
Floor and Wall Base Assembly
Remove the positioning knobs and place the floor bases (check
that the bases are placed as shown in the image below). Attach
the positioning knobs by screwing them clockwise. Insert the
base tube into each rear cavities located in the floor bases
until the safety buttons appear on the lower holes and pops
into place. Loosen the tube clamping knob and remove the Air
Circulator.
CPTIM0003 R01
