Idiomas disponibles
Idiomas disponibles
Instructions for Use
Placing
Unwind the power cable from the cable winder in the underside of the
•
appliance.
Pass the cable through one of the two cable guides on the underside of the
•
appliance. This will prevent jamming during usage.
Place the toaster on a dry and level surface.
•
Before taking into use
Heat the appliance up at least five times at the maximum setting without the
insertion of bread slices.
Please take note:
The operating button only engages when the power cable is connected to
•
a power socket.
With the first usage a slight smell can arise (minimal smoke development is
•
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation.
Adjusting the browning level
The desired level of browning, from "light" (1) to "dark" (6) can be adjusted
infinitely with the browning regulator of the toasting time electronics.
Take note that, subject to the demand made on the toaster, the level of
browning can vary somewhat with an unvarying adjustment of the browning
regulator! The less the number of slices inserted, the higher is the browning level.
Thus, if you are not intending to toast many slices, always adjust the browning
regulator a little lower.
Tips on usage
Toast mixed-flour breads at higher browning levels than white bread.
•
Matured, dry bread browns faster than fresh bread.
Avoid using slices that are too big or too thick, as these can easily become
•
jammed in the appliance.
In the event of a malfunction and when cleaning the appliance, remove
•
the power plug from the wall socket. Risk of electric shock!
Loosen jammed slices of bread with a blunt wooden object (e.g. a wooden
•
spatula or spoon). Do NOT touch the heater elements.
Differences in bread sorts, moisture and the thickness of individual slices
•
influence the browning of the toast. Therefore, the bread for toasting should
be kept in sealed packaging until required.
Instruction Manual
English
3
