Tena SmartCare Change Indicator Guía Rápida página 8

Remove and clean
5
REMOVE THE CHANGE INDICATOR CLEAN WHEN ASSEMBLED
5.1 5.2
Remove the Change Indicator before Only clean when assembled.
removing the TENA product.
Clean once a week or as required.
Grip the tab then gently peel
straight downwards.
Use an alcohol-based disinfectant
when needed.
Put the Change Indicator on a flat
surface when not in use.
Remember to press both buttons
simultaneously for two seconds at every
change. This registers the change and
resets the system.
14 15